1.5/2.5/4mm² PVC Insulated Copper Building Wire, 300/500V, IEC 60227, for Oman Electrical Installations

การจัดหมวดหมู่：

การสร้างสายไฟ
แบ่งปัน：
รหัส QR:
เวลาเผยแพร่：

2025-08-13 07:38:14

สอบถามรายละเอียดเพิ่มเติมทันที

การแนะนำผลิตภัณฑ์

Detailed Introduction to 1.5/2.5/4mm² PVC Insulated Copper Building wires

I. From the Perspective of the Product Itself

(1) Specification Parameters

The 1.5/2.5/4mm² PVC insulated copper Building Wires are high-quality products specially designed for electrical installation scenarios in Oman, with rigorous settings in specification parameters to fully meet the needs of local building electrical systems.

The rated voltage of this series of wires is 300/500V, and this voltage level enables them to operate stably in electrical installations of various buildings in Oman, providing reliable power transmission for electrical equipment of different powers. At the same time, they strictly comply with the IEC 60227 standard, and adherence to this standard ensures that the products meet internationally recognized levels in terms of performance and quality, enabling them to be successfully applied in the electrical installation market in Oman.

In terms of conductor specifications, it covers three commonly used specifications: 1.5mm², 2.5mm², and 4mm². The conductor is made of high-purity copper material with a purity of more than 99.95%. Such high purity endows the conductor with excellent electrical conductivity. At 20°C, the DC resistance of wires of different specifications is strictly controlled within the standard range: 1.5mm² ≤12.1Ω/km, 2.5mm² ≤7.41Ω/km, and 4mm² ≤4.61Ω/km. A lower DC resistance means less loss during current transmission, which can improve the efficiency of power transmission and reduce energy waste.

The insulation layer is made of high-quality polyvinyl chloride (PVC) material, and its thickness is precisely designed according to different specifications. The thickness of the insulation layer for 1.5mm² and 2.5mm² is 0.7mm, and that for 4mm² is 0.8mm. This differentiated thickness design not only ensures the reliability of insulation performance but also adapts to the needs of conductors of different specifications. The PVC Insulation layer has good insulation performance, with a withstand voltage strength of not less than 10kV/mm. Under the rated voltage of 300/500V, it can reliably isolate current, effectively prevent electric leakage accidents, and ensure electrical safety.

In addition, the temperature resistance range of the PVC insulation layer is -15°C to 70°C, which enables it to well adapt to the climatic environment in Oman. Oman has a tropical desert climate with high temperatures in summer, and the insulation layer of this wire can maintain stable performance at higher temperatures; in winter, when the temperature is relatively low, it will not become brittle and break due to low temperature, ensuring the service life and safety of the wire. At the same time, the insulation layer also has certain corrosion resistance and oil resistance, which can cope with complex conditions such as dust, moisture, and slight chemical erosion that may be encountered during building installation, further ensuring the stable operation of the wire.

(2) Characteristic Uses

The 1.5/2.5/4mm² PVC insulated Copper Building Wires, with their different specifications and performance characteristics, have clear and extensive characteristic uses in electrical installations in Oman, and can meet the electrical needs of various building scenarios.

The 1.5mm² wire is often used in lighting circuits, Internal Wiring of small household appliances, and connection of weak current systems in electrical installations of buildings in Oman. In family environments, the power supply lines of lamps in living rooms, bedrooms, kitchens, and other areas mostly use 1.5mm² wires. Whether it is a chandelier, wall lamp, or downlight, they can obtain stable power support through it, ensuring the normal operation of the lighting system. For small household appliances, such as small fans, table lamps, chargers, etc., their internal wiring or external connection lines also often use 1.5mm² wires, because these devices have low power, and the current-carrying capacity of 1.5mm² wires can fully meet their needs. In terms of weak current systems, such as auxiliary power supply lines for telephone lines and network lines, 1.5mm² wires can also play an important role in providing stable power for weak current equipment.

The 2.5mm² wire is suitable for ordinary socket circuits, power supply of small and medium-sized household appliances, and socket wiring in offices. In families in Oman, ordinary power socket circuits in living rooms, bedrooms, and kitchens usually use 2.5mm² wires. These sockets need to supply power to commonly used small and medium-sized household appliances such as TVs, refrigerators, washing machines, and microwave ovens. The current-carrying capacity of 2.5mm² wires can meet the power needs of these devices when they are running at the same time. In offices, socket wiring for various office equipment such as computers, printers, and copiers also mostly uses 2.5mm² wires to ensure that office equipment can work normally and improve work efficiency.

The 4mm² wire is mainly used for special lines of medium-power electrical appliances such as air conditioners and electric water heaters, as well as branch circuits of small distribution boxes. In commercial buildings and residences in Oman, air conditioners are essential electrical equipment, especially in hot summers. The power of air conditioners is relatively large, and 4mm² wires can provide stable power transmission for them, avoiding safety problems caused by insufficient line load. Electric water heaters also belong to medium-power electrical appliances, and their special lines use 4mm² wires, which can ensure their normal heating and use. In addition, in the branch circuits of small distribution boxes, 4mm² wires are also a common choice to ensure that there is no overload during power distribution. It can safely distribute power from the distribution box to various electrical areas.

(3) Material and Style

The 1.5/2.5/4mm² PVC insulated copper building wires have been carefully considered in material selection and style design to adapt to electrical installations in Oman and ensure the quality and practicality of the products.

In terms of materials, the conductor is made of high-purity copper. High-purity copper has excellent electrical conductivity, which can reduce energy loss during current transmission and improve power transmission efficiency. This is crucial for building electrical systems and can reduce electricity costs. At the same time, copper has good ductility and toughness, so that Copper Wires are not easy to break during processing, ensuring the structural stability of the conductor, and can withstand various external forces during installation and use, such as bending and stretching.

The insulation layer is made of high-quality polyvinyl chloride (PVC) material. PVC material has good insulation performance, which can effectively isolate current, prevent electric leakage accidents, and ensure electrical safety. It also has a certain mechanical strength, which can protect the internal Copper Conductor from external physical damage, such as collision and friction. In addition, PVC material has good corrosion resistance and oil resistance, which can resist the erosion of dust, moisture, chemical substances, etc. that may exist in the building environment, and extend the service life of the wire. Moreover, PVC material has good processing performance, which is easy to be made into insulation layers of different thicknesses to adapt to conductors of different specifications.

In terms of style, this series of wires adopts a single-core design, with a uniform PVC insulation layer wrapped outside. This style is simple and practical, and is convenient for laying and installation in the process of building electrical installation. The color of the wire is usually light colors such as white or gray. This color choice not only conforms to the conventional aesthetics of electrical installation but also is convenient for distinguishing from other pipelines during installation. At the same time, light colors are easier to identify in dark environments, which is convenient for construction personnel to operate. In addition, the surface of the wire is smooth, with no obvious protrusions or depressions, which makes it smoother in the process of pipe threading and wiring, reduces friction with the inner wall of the pipe, and reduces the risk of damage.

(4) Production Process

The production process of 1.5/2.5/4mm² PVC insulated copper building wires is strict and standardized, and every link is carefully controlled to ensure that the product quality meets relevant standards and the requirements of electrical installations in Oman.

First is the screening and processing of copper materials. Copper materials with a purity of more than 99.95% are selected as raw materials. Before being put into production, the copper materials will be strictly tested to ensure that their purity and various performance indicators meet the requirements. Then, the copper material is drawn through a wire drawing machine to draw the copper material into copper wires of different diameters to meet the needs of 1.5mm², 2.5mm², and 4mm² conductors. During the wire drawing process, it is necessary to accurately control the speed, tension, and other parameters of the wire drawing machine to ensure that the diameter of the copper wire is uniform, the surface is smooth, and defects such as burrs and cracks are avoided.

Next is the stranding of the conductor (for multi-strand conductors). Although this series of wires is designed with a Single Core, in some cases, in order to enhance the Flexibility and mechanical strength of the conductor, multiple strands of fine copper wires may be stranded. During the stranding process, multiple strands of copper wires need to be stranded according to certain rules to ensure that the Stranded Conductor has a compact and round structure, and the cross-sectional area meets the specification requirements. The stranding equipment will accurately control the stranding pitch and tension to ensure the stable performance of the conductor.

Then is the extrusion molding of the insulation layer. The PVC material is heated to a molten state, and the molten PVC material is uniformly coated on the outside of the copper conductor through an extruder to form an insulation layer. During the extrusion process, it is necessary to accurately control the temperature, pressure, speed, and other parameters of the extruder to ensure that the thickness of the insulation layer is uniform, the surface is smooth, and it is closely combined with the conductor without defects such as bubbles and pinholes. For wires of different specifications, the extrusion parameters will be adjusted according to the design requirements to ensure that the insulation layer thickness of 1.5mm² and 2.5mm² wires is 0.7mm, and that of 4mm² wires is 0.8mm.

After extrusion, the wire needs to be cooled to quickly solidify the PVC insulation layer. Cooling usually adopts water cooling, and the wire is cooled to room temperature through a cold water tank to ensure the dimensional stability and performance of the insulation layer. The cooled wire will be pulled by traction equipment to ensure the straightness and uniform tension of the wire.

Finally, the finished products are inspected and packaged. The produced wires are subject to strict quality inspection, including appearance inspection, size measurement, electrical performance testing (such as DC resistance testing, insulation resistance testing, voltage resistance testing, etc.), and mechanical performance testing. Only products that pass all inspections can be judged as qualified products. Qualified wires will be cut according to a certain length and wound on reels or packaged in coils for transportation and storage.

II. From the Perspective of General Product Information

(1) Packaging

The packaging design of 1.5/2.5/4mm² PVC insulated copper building wires fully considers the product protection, transportation, and storage needs to ensure that the products are in good condition when they reach customers in Oman.

This series of wires is usually packaged in coils, and the length of each coil depends on customer needs and conventional market specifications, with common ones being 100 meters/coil, 200 meters/coil, 500 meters/coil, etc. The coil packaging method is convenient for storing and taking the wires, and can also avoid the wires from being tangled or knotted during transportation and storage.

The packaging material is tough plastic film or woven bag. The outside of the wire coil will be tightly wrapped with a layer of plastic film, which has good moisture-proof and dust-proof performance and can protect the wire from moisture, dust, and other impurities in the external environment. For some products that need long-distance transportation or long-term storage, a woven bag will be put over the plastic film. The woven bag has high strength and wear resistance, which can further protect the wire and prevent damage caused by collision, friction, etc. during transportation.

Relevant product information will be clearly marked on the package, including product name (1.5/2.5/4mm² PVC insulated copper building wires), specification model, rated voltage (300/500V), execution standard (IEC 60227), length, production date, manufacturer, contact information, etc. This information is not only convenient for customers to check when receiving goods but also can provide a basis for product traceability and quality tracking. In addition, the package may also be printed with product certification marks, such as marks conforming to IEC standards, to highlight the quality and compliance of the product.

For products exported to Oman, the labels on the packaging will also take into account local language and regulatory requirements, and may be marked in both English and Arabic to ensure that local customers can clearly understand the product information.

(2) Transportation

The transportation process of 1.5/2.5/4mm² PVC insulated copper building wires needs to be strictly controlled to ensure that the products can be delivered to customers in Oman safely and timely.

In terms of transportation mode selection, according to factors such as transportation distance and quantity of goods, sea transportation, land transportation, etc. can be adopted. For products exported to Oman, sea transportation is one of the main transportation methods. Sea transportation has the advantages of large transportation capacity and relatively low cost, and is suitable for long-distance transportation of large quantities of goods. For transportation within Oman, land transportation, such as truck transportation, is mostly used. Land transportation has the characteristics of high flexibility and door-to-door service, which is convenient for transporting products to various construction sites or customer-designated locations.

During transportation, the wires need to be properly fixed and protected. For coiled wires, they should be neatly stacked in the cargo hold or carriage of the transport tool and fixed with ropes, pallets, etc. to prevent rolling, collision, etc. during transportation and avoid damage caused by mutual extrusion between wire coils. At the same time, attention should be paid to avoiding the wires from being affected by extreme environments such as direct sunlight, rain, high temperature, and severe cold. When transporting in summer, sunshade measures should be taken to prevent the insulation layer from aging and deformation due to excessive temperature of the wire; when transporting in the rainy season, rainproof measures should be taken to ensure that the package is intact and prevent rainwater from entering the package and damaging the wire.

Before transportation, a detailed inspection of the goods should be carried out to check whether the specifications, quantity, and packaging of the products meet the order requirements, and ensure that the goods information is accurate. During transportation, the goods should be tracked and monitored to timely understand the transportation status of the goods, such as transportation location and transportation progress, so as to deal with possible problems in a timely manner. After the goods arrive at the destination, they should be inspected together with the customer, and the handover procedures can only be completed after confirming that the products are intact.

(3) Delivery

The delivery process of 1.5/2.5/4mm² PVC insulated copper building wires is rigorous and standardized, aiming to ensure that the products can be accurately and timely sent to customers in Oman.

After the customer places an order, the sales department of the enterprise will promptly transmit the order information to the warehouse and production department. The warehouse department will check the inventory according to the order requirements. If the inventory is sufficient, it will immediately arrange the sorting and packaging of the goods; if the inventory is insufficient, the production department will organize production as soon as possible and formulate a detailed production plan to ensure that the production task is completed within the specified delivery period.

In the process of goods sorting, warehouse staff will strictly select according to the specifications, quantity, and other information on the order to ensure that the delivered goods are consistent with the order requirements. For 1.5mm², 2.5mm², and 4mm² wires, they should be sorted separately to avoid mixed packaging or wrong packaging. After sorting, the goods will be rechecked by a specially assigned person to ensure the accuracy of sorting.

After packaging, the warehouse department will input the goods information into the logistics management system, including product name, specification, quantity, receiving address, contact person, contact information, etc., and select a suitable logistics company for cooperation. After signing the transportation contract with the logistics company, the goods will be delivered to the logistics company, and relevant transportation procedures will be handled, such as filling in the waybill and customs declaration form (for exported products).

At the same time, the enterprise will promptly inform the customer of the delivery information, including the name of the logistics company, waybill number, estimated arrival time, etc., so that the customer can check the transportation status of the goods at any time. Customers can check the location and transportation progress of the goods through the official website of the logistics company or the customer service hotline. In case of special circumstances leading to delivery delay during the delivery process, such as bad weather, traffic jam, production failure, etc., the enterprise will timely communicate with the customer, explain the reason, and negotiate a solution, such as adjusting the delivery date and giving priority to arranging other batches of goods.

(4) Samples

In order to allow customers in Oman to fully understand the performance and quality of 1.5/2.5/4mm² PVC insulated copper building wires before purchasing in large quantities, the enterprise provides sample services for customers to test and evaluate.

Customers can apply for samples by phone, email, online consultation, etc., indicating the specifications, quantity, and other information of the required samples. For 1.5mm², 2.5mm², and 4mm² wires, customers can choose one or more specifications of samples according to their own needs.

After receiving the sample application, the enterprise will review it in a timely manner. If it meets the sample provision conditions, it will arrange the preparation and delivery of samples within the specified time. The sample preparation process is the same as the production process of formal products to ensure that the samples can accurately reflect the actual quality and performance of the products. The length of the sample is usually 1-5 meters. For each specification of wire, a sufficient length of sample will be provided to facilitate customers to conduct various performance tests, such as conductivity test, insulation performance test, mechanical performance test, etc.

The packaging of the sample is similar to that of the formal product but will be marked with "Sample" on the packaging for easy identification by customers. Meanwhile, the sample will be accompanied by detailed product information, such as product manuals, test reports, and specification parameter tables. These materials are written in both English and Arabic to facilitate reading and understanding by customers in Oman. The test reports include copper conductor purity testing, DC resistance testing, insulation layer voltage resistance testing, temperature resistance testing, etc., allowing customers to have a more intuitive understanding of product quality.

Samples are usually sent via international express (for customers in Oman), such as DHL and FedEx. These couriers are characterized by fast speed and good service, ensuring that samples can reach customers in a relatively short time. Regarding sample fees, for regular sample applications, the enterprise may provide samples free of charge, but customers need to bear the sample transportation costs; for samples of special specifications or customized samples, the enterprise may charge a certain sample fee, which will be reduced or exempted according to the situation when customers purchase in large quantities later.

After receiving the samples, if customers have any questions about the products or need further technical support, the enterprise's technical personnel will promptly provide help and answers. They can communicate with customers through phone calls, emails, video conferences, etc., to provide professional technical guidance.

(5) After-sales Service

The after-sales service system for 1.5/2.5/4mm² PVC insulated copper building wires is well-developed, aiming to provide customers in Oman with comprehensive support and protection and solve problems encountered by customers during use.

The enterprise promises that within the product quality guarantee period, if the product has quality problems caused by non-human factors, it will provide customers with free return and exchange services. The quality guarantee period is usually 1-3 years, and the specific period depends on the product's service environment and customer requirements. During the quality guarantee period, if a customer finds quality problems with the product, they can apply for after-sales service with the purchase certificate. The enterprise will arrange professional personnel to verify. If it is confirmed to be a quality problem after verification, the customer will be handled with return and exchange procedures in a timely manner, and the relevant transportation costs will be borne (for customers in Oman, the bearing method of transportation costs will be negotiated according to specific circumstances).

At the same time, the enterprise also provides professional technical support services. When customers encounter any technical problems during product installation, use, and maintenance, they can seek help from the enterprise's technical personnel by phone, email, online consultation, etc. Technical personnel will provide detailed solutions and guidance according to the customer's problems, such as installation specifications and troubleshooting methods. For some complex technical problems, the enterprise can also arrange technical personnel to go to the site in Oman for guidance and services to ensure that customers can use the product correctly and give full play to the product's performance.

In addition, the enterprise has established a sound customer feedback mechanism and attaches great importance to customers' opinions and suggestions. If customers have any dissatisfaction or suggestions on products or services, they can feedback to the enterprise in a timely manner. The enterprise will take every feedback information seriously, handle and improve it in a timely manner, and continuously improve product quality and service level.

For large-scale construction projects in Oman, the enterprise can also provide long-term after-sales tracking services, regularly visit customers to understand the use of products, and provide preventive maintenance suggestions to ensure the long-term stable operation of the electrical system.