The 0.6/1kV U1000 RO2V, R2V insulated single core copper cables compliant with NFC 32-321 standard include two cross-sectional specifications: 1×120mm² and 1×240mm², suitable for medium and low voltage power transmission scenarios.​ The conductors of this series of cables are made of high-purity copper, which has excellent conductivity, enabling efficient power transmission and reducing energy loss. The insulation layer is made of materials meeting RO2V and R2V standards, with good electrical insulation performance and aging resistance. It can work stably under the rated voltage of 0.6/1kV (U1000) and resist mechanical wear and chemical erosion in the environment.​ The 1×120mm² specification is suitable for power supply of medium-power equipment, such as industrial motors and building distribution trunks; the 1×240mm² is applicable to high-power load scenarios, such as large transformer connections and main cable lines in factory areas. The single core design facilitates flexible laying, adapting to various installation methods such as direct burial, pipe threading and overhead, meeting the wiring needs of different projects.​ In general, with strong compliance, stable performance and wide specification adaptability, this series of cables has become a reliable power transmission solution in industrial, civil and public infrastructure.

1.5mm², 2.5mm² and 4mm² 450/750V PVC insulated copper cables are three widely used products in low-voltage electrical systems. With a unified rated voltage standard and their respective adapted cross-sectional areas, they meet the power demand in different scenarios and all comply with relevant industry specifications, providing stable and reliable guarantees for electrical connections.​ In terms of specification parameters, all three cables have a rated voltage of 450/750V, which means that in an AC system, the rated voltage between conductors is 450V, and the rated voltage between conductors and the ground is 750V, making them safely applicable to low-voltage distribution networks. The difference in cross-sectional area is their most significant distinction: the current-carrying capacity of the 1.5mm² cable is usually 10-16 amperes, the 2.5mm² cable is about 16-25 amperes, and the 4mm² cable can reach 25-32 amperes. The conductors are all made of high-purity electrolytic copper, and the multi-strand stranded structure enhances flexibility, facilitating bending and laying, while reducing the risk of breakage due to mechanical stress. The thickness of the outer PVC insulation layer increases slightly with the increase of cross-sectional area. The insulation thickness of 1.5mm² is about 0.6-0.8mm, 2.5mm² is about 0.8-1.0mm, and 4mm² is about 1.0-1.2mm, ensuring good electrical insulation performance, which can effectively isolate current and prevent short circuits and leakage.​ In terms of performance, the PVC insulation layers of the three cables all have excellent chemical corrosion resistance, which can resist the erosion of acids, alkalis, oils and other substances, and prolong their service life. At the same time, they have certain wear resistance and flame retardancy, so they are not easy to be damaged by friction in daily use, and can delay combustion in case of fire, improving safety. The working temperature range is -15℃ to 70℃, which can adapt to the climate conditions of different regions and seasons. In addition, the low resistance characteristic of the conductor reduces energy loss during current transmission, ensuring the efficiency of power transmission.​ In terms of application scenarios, the three cables have their own focuses and complement each other. The 1.5mm² cable is suitable for home lighting lines, ordinary socket circuits and power supply of small household appliances (such as televisions and computers). Its small size and good flexibility allow it to easily pass through narrow conduits. The 2.5mm² cable plays a role in scenarios with slightly higher power, such as power supply for air conditioners (1.5 horsepower and below), electric water heaters (below 1500W) and other household appliances, as well as lighting main lines and socket circuits in commercial places. The 4mm² cable has strong current-carrying capacity and is mainly used for high-power equipment, such as air conditioners of 2 horsepower and above, electric ovens, bathroom heaters, etc. It is also suitable for the main incoming line of residences, and special line power supply for kitchens and bathrooms, which can meet the needs of multiple high-power electrical appliances working at the same time.​ During installation and use, it is necessary to select the corresponding specification of cable according to the specific load power to avoid overload. During laying, excessive bending and stretching should be avoided to prevent damage to the insulation layer; keep away from high-temperature heat sources to prevent accelerated aging of PVC materials. Regularly check the appearance and connection of the cable, and timely handle problems such as insulation layer damage and conductor oxidation, which can further ensure the safe and stable operation of the electrical system.

BV H05V-U and H07V-U series wires and cables for house wiring are solid pure copper conductor PVC insulated products specially designed for residential and small building electrical systems. They cover common specifications such as 1.5mm², 2.5mm², 4mm², 6mm², and 10mm², and have become an ideal choice for indoor fixed wiring due to their high safety and stability.​ Both cables use solid electrolytic copper conductors with a purity of ≥99.95%. After annealing treatment, the conductivity is ≥58MS/m, ensuring efficient current transmission. Among them, H05V-U has a rated voltage of 300/500V, suitable for low-power circuits; H07V-U has a rated voltage of 450/750V, which can carry higher-power equipment. The current-carrying capacity of different specifications is suitable for various scenarios: 1.5mm² (16A) is used for lighting circuits, 2.5mm² (24A) is suitable for ordinary sockets, 4mm² (32A) and 6mm² (40A) can be connected to high-power appliances such as air conditioners and electric water heaters, and 10mm² (63A) is applicable to household main lines or branch power distribution.​ The insulation layer is made of temperature-resistant PVC material. H05V-U has an operating temperature range of -15℃ to 70℃, and H07V-U can withstand an environment of -25℃ to 80℃. Both have passed UL94 V-0 flame retardant certification and can self-extinguish within 30 seconds after the open flame is removed. The insulation thickness increases from 0.7mm to 1.4mm according to specifications, with an insulation resistance of ≥100MΩ, which can withstand a 2kV power frequency withstand voltage test, effectively isolating current and resisting daily wear. The surface is printed with clear marks, including specifications, voltage level, CE certification (H05V-U/H07V-U), GB 5023 standard, and production information, facilitating construction identification and quality traceability.​ The cables come in various colors (red, blue, yellow-green, etc.), which can distinguish phase lines, neutral lines, and ground lines, reducing the risk of wiring errors. The solid structure has strong rigidity, suitable for fixed installations such as wall embedding and pipe threading, providing long-term stable power support for house electrical systems. It is a preferred wiring solution that balances safety, durability, and economy.