The RV-K Cable series (170, 195, 1120, 1150) is a single-core copper conductor cable developed for the special working conditions of power stations. With PVC as the insulating material, it integrates stability, adaptability and safety, becoming a core component of the power transmission system in power stations.​ The conductor is made of high-conductivity copper with a purity of 99.9%, processed through precision wire drawing and annealing processes. It not only has low conduction loss but also excellent mechanical strength, able to withstand current impact under long-term high-load operation in power stations. The four cross-sectional area specifications in the series—70mm², 95mm², 120mm², and 150mm²—form a complete gradient: 70mm² is suitable for power supply of small and medium-sized auxiliary equipment such as water pumps and fans; 95mm² can meet the needs of low-voltage side outgoing lines of transformers; 120mm² and 150mm² are adapted to medium and high-load core equipment such as steam turbines and generator sets, realizing full-scenario power coverage.​ The PVC insulation layer has been improved with a special formula, extending the temperature resistance range to -15℃ to 70℃, and can maintain stable insulation performance in high-temperature machine rooms in summer or open-air areas in winter of power stations. Its dense molecular structure can effectively block water vapor, dust and slight chemical corrosion, avoiding insulation aging caused by environmental factors. At the same time, PVC material has self-extinguishing properties, which can quickly flame retardant when exposed to open fire, delaying the spread of fire and gaining time for fire emergency in power stations.​ The single-core design is a major advantage of this series: the non-stranded structure reduces internal stress when the cable is bent. When laying in narrow spaces such as cable trenches and equipment mezzanines in power stations, it can easily bypass obstacles such as pipes and brackets, reducing installation difficulty. In addition, the outer sheath of the cable is made of wear-resistant PVC material, with outstanding anti-extrusion performance, which can resist mechanical collisions during daily maintenance and prolong service life.​ From the precision control circuit of the fuel pump room to the power transmission main line of the main factory building, the RV-K Cable series, with its diversified specifications and scene adaptability, perfectly connects all levels of the power supply system in the power station. It not only ensures the continuous operation of key equipment but also provides convenient wiring and maintenance conditions for operation and maintenance personnel, making it a preferred solution that balances technical performance and practical value.

AS/NZS5000 V-90 CU Electric Cable: 1.5mm², 2.5mm², 4mm² 2C E Twin Flat TPS with PVC Insulation for Heating Applications​ The AS/NZS5000 V-90 copper electric cable, available in 1.5mm², 2.5mm², and 4mm² sizes, is a high-performance solution engineered for heating applications and general electrical installations. Designed as a 2C E twin flat TPS (Thermoplastic Sheathed Cable), it features stranded copper conductors, PVC insulation, and a 600V rating, ensuring compliance with Australian and New Zealand standards for safety and reliability.​ The stranded copper conductors deliver exceptional conductivity, enabling efficient current transmission with minimal energy loss—critical for heating systems where consistent power delivery directly impacts performance. Their flexible design simplifies installation in tight spaces, around heating equipment, or within wall cavities, while resisting fatigue from thermal expansion and contraction common in heating environments.​ The PVC insulation, rated for V-90 temperature tolerance (up to 90°C), provides robust protection against moisture, abrasion, and chemical exposure. This durability ensures the cable thrives in both dry and moderately humid settings, from residential underfloor heating to commercial radiant systems. The twin flat TPS design integrates two conductors in a flat sheath, streamlining routing and reducing installation time, while the 2C E configuration (with an earth conductor) enhances safety by providing a dedicated grounding path.​ With 600V rating, the cable handles the voltage demands of heating appliances, thermostats, and distribution boards. Sizing options cater to varying loads: 1.5mm² for small heaters, 2.5mm² for medium-duty systems, and 4mm² for larger commercial heating setups. Compliant with AS/NZS5000, this cable combines copper’s conductivity, PVC’s resilience, and engineered design, making it a trusted choice for heating applications in Australia and New Zealand.

The Pure Copper THHN Style Cable with 200mm² stranded conductor is a power transmission cable specially designed for high-power and harsh environments. Its core configuration includes a large-cross-section 200mm² stranded pure copper conductor, double-layer protection of PVC insulation and nylon sheath, with 90°C high-temperature resistance and 600V rated voltage. It is widely suitable for industrial plants, large commercial complexes, data centers, and infrastructure scenarios that have extremely high requirements for current-carrying capacity and protection performance. It is an ideal choice to solve the problems of high-power equipment power supply and wiring in complex environments.​ In terms of core performance and specifications, the 200mm² stranded pure copper conductor is the core guarantee of its current transmission capacity. Compared with small-cross-section cables, the super-large conductor cross-sectional area of 200mm² endows it with extremely strong current-carrying capacity. The rated current-carrying capacity can reach more than 600A at room temperature (slightly different according to the installation environment, such as about 610A when laid in air and about 480A when laid in pipes), which can easily meet the power needs of high-power equipment such as large industrial motors, high-voltage frequency converters, and data center server clusters. The conductor is made of stranded pure copper wires. The electrolytic copper material with a purity of ≥99.95% not only ensures excellent electrical conductivity (DC resistance ≤0.091Ω/km) and effectively reduces energy loss during transmission, but also the stranded structure greatly improves the flexibility of the cable. This makes it easier to operate in scenarios such as wiring of large equipment and turning in narrow spaces, avoiding the disadvantages of large-cross-section solid conductors that are easy to break and difficult to bend.​ In terms of material design, the double-layer protection structure of PVC insulation and nylon sheath endows the cable with comprehensive environmental adaptability. The inner PVC insulation layer adopts a high-temperature resistant modified formula, which can work stably in a continuous high-temperature environment of 90°C. Even in case of short-term overload heating of equipment or ambient temperature fluctuations, it can maintain stable insulation performance and avoid short-circuit risks caused by insulation softening and breakdown due to high temperature. At the same time, the PVC insulation layer has excellent electrical insulation (insulation resistance ≥10¹⁴Ω·cm), which can effectively isolate the conductor from the external environment and prevent electric leakage accidents. The outer nylon sheath further strengthens the protection. The high wear resistance of nylon material (tested to withstand 10,000 frictions without damage) can resist scratches and extrusion during wiring, as well as mechanical wear during long-term use. It is especially suitable for scenarios vulnerable to physical impact such as industrial plant floor wiring and cable tray laying. In addition, the nylon sheath also has a certain degree of chemical corrosion resistance, which can resist the erosion of oil stains, weak acids and alkalis and other common industrial pollutants, and extend the service life of the cable.​ The combination of 90°C high-temperature resistance and 600V rated voltage makes it suitable for various complex electrical environments. The upper limit of 90°C operating temperature is much higher than that of ordinary cables (usually 60-75°C), and it can be directly used in areas close to heat sources, such as around industrial boilers, generator rooms, and high-temperature production workshops, without additional heat insulation protection measures. The 600V rated voltage complies with the low-voltage power distribution system standard, which can not only adapt to the 380V three-phase power system commonly used in the industrial field, but also meet the power supply needs of high-voltage equipment below 600V in commercial buildings, with strong compatibility. For example, in a large automobile manufacturing plant, this cable can directly supply power to a 500kW stamping machine tool. When the equipment is running at full load, the conductor temperature is stable at about 75°C, far below the 90°C upper limit, and the insulation layer and nylon sheath have no softening or deformation, ensuring long-term safe operation.​ In terms of application scenarios, relying on its large cross-section, high protection, and high-temperature resistance, this cable covers a variety of high-demand fields. In the industrial field, it is used for the main power supply lines of large motors, compressors, and melting furnaces in industries such as iron and steel, chemical engineering, and machinery manufacturing, solving the problem of large current transmission for high-power equipment. In the commercial and infrastructure fields, it is suitable for the central air-conditioning main units and elevator group control systems of large commercial complexes, as well as the UPS power supplies and main power supply circuits of server cabinets in data centers, ensuring the stable operation of key equipment. In special scenarios such as underground pipe corridors and bridge tunnel power trunks, the wear resistance of the nylon sheath and the moisture resistance of the PVC insulation can cope with complex environments such as underground humidity and sand friction, reducing later maintenance costs.​ Overall, the Pure Copper THHN Style 200mm² Cable meets the large current transmission needs of high-power equipment through its large-cross-section stranded pure copper conductor, double-layer protection structure, and excellent high-temperature and voltage resistance. At the same time, it can resist physical and chemical damage in complex environments, providing a safe, efficient, and long-term solution for various high-demand power transmission scenarios. It is a core choice for high-power wiring in industrial and large commercial fields.

NYA NAYA Construction Cable​ The NYA NAYA Construction Cable, available in 1.5mm², 2.5mm², 4mm², 6mm², 10mm², and 16mm², is a robust electrical solution engineered for building and construction applications. Featuring high-purity copper conductors—stranded for flexibility and enhanced current-carrying capacity—it ensures efficient power transmission across residential, commercial, and industrial projects.​ Encased in durable PVC insulation, the cable resists moisture, abrasion, and temperature fluctuations, operating reliably within -15°C to +70°C. This insulation provides flame-retardant properties, adhering to international standards like IEC 60228 and DIN VDE 0281, which minimizes fire risks in critical infrastructure.​ The range of sizes caters to diverse load requirements: smaller gauges (1.5–6mm²) suit lighting, sockets, and small machinery, while larger variants (10–16mm²) handle heavy-duty systems such as HVAC, power distribution, and industrial equipment. Its flexibility simplifies installation in walls, ceilings, and conduits, making it ideal for both new builds and renovations.​ Color-coded insulation aids in phase identification, streamlining installation and maintenance. Compliant with global construction regulations, the NYA NAYA Cable balances durability, safety, and cost-effectiveness, making it a trusted choice for contractors and engineers prioritizing long-term performance in building projects.

NYA NAYA Construction Cable​ The NYA NAYA Construction Cable, offered in 1.5mm², 2.5mm², 4mm², 6mm², 10mm², and 16mm², is a premium electrical solution tailored for building and construction projects. Its high-purity stranded copper conductor ensures superior electrical conductivity and flexibility, enabling efficient power transmission across residential, commercial, and industrial settings. This design allows easy routing through walls, conduits, and tight spaces, crucial for both new builds and renovations.​ Encased in durable PVC insulation, the cable resists moisture, abrasion, and temperature extremes (-15°C to +70°C), ensuring long-term reliability in diverse environments—from damp basements to industrial facilities. The insulation’s flame-retardant properties, compliant with IEC 60228 and DIN VDE 0281, minimize fire risks, enhancing safety in critical infrastructure.​ Size versatility caters to varied loads: 1.5–6mm² for lighting, sockets, and small machinery; 10–16mm² for heavy-duty systems like HVAC and industrial equipment. Color-coded insulation simplifies phase identification, streamlining installation and maintenance. Compliant with global standards, this cable balances durability, safety, and cost-effectiveness, making it a top choice for contractors prioritizing consistent performance in construction projects.